What is the Maximum Distance for UTP Cable PoE Mikrotik?
How much is the maximum distance for UTP Cable PoE Mikrotik? These questions may never show up your memory settings which are often mainly mikrotik Mikrotik. Poe or the length of the Power over Ethernet is a device which can transmit electricity through the medium voltage cable UTP to power other tools or Mikrotik. So no need to pull the power adapter cable is too long. A perfect solution for those of you who wish to establish a wireless network Mikrotik good outdoor Point to Point (PtP) and Point to Multi Point (PtM).
Already know right like what forms of Power over Ethernet (PoE) Mikrotik? The appearance of PoE his Mikrotik as below.
On the image of PoE at the top, there are two ports for RJ-45 connector.
LAN ports--> from PoE to the PC for remote Mikrotik. Maximum cable length of 100 meters.
Port POE--> from PoE to Mikrotik Mikrotik to animate. Maximum cable length?
In theory the maximum distance the cable UTP cable is 100 meters. However, in practice can differ depending on the condition of the field and equipment.
Well, now the question is how much is the maximum distance for UTP Cable PoE Mikrotik?
The answer is also diverse. Some say it could be up to 20 meters, 40 meters, 50 meters, even 80 meters. However the exact condition of the field and the tools used are also different.
According to my experience, the maximum distance for UTP cable Mikrotik is roughly 20 m PoE for 24V voltage. The result could work with normal mikrotik. However when I add cable length being 35 metres with PoE voltage of 24V, Mikrotik does not want to flame.
Then I tried adding voltage to be 30V by replacing the default adapter power power adapter with Mikrotik which can be set teganganya of 18-32 volts. As a result, Mikrotik want to flame and can ping as well as remotely from a PC.
Do not raise the voltage is too high. Although at its already dilengkap mikrotik RB with Overvoltage Protection up to 60 volts, however it's good don't use too high a voltage in order for RB durability.
Obstacles that often arise when using UTP cable with PoE that long:
Mikrotik does not want a flame because the cable is too long.
Mikrotik flame but often restart and die alone because the voltage loss in the cable UTP is too high.
Mikrotik nyala but not accessible (remote) either ping or via Winbox because cable is too long.
How to use PoE solution with the long cable Mikrotik?
1 Use UTP cat 5 cable with the best quality and make sure crimping connector RJ-45.
2 for the installation of a pool it is recommended to use STP cable.
3 Check the voltage output of the PoE to drop the voltage, be sure the cable is not too large.
4 the most surefire Solution is to raise the voltage to PoE adapter, for example from 24V be 30V.
The info in this article can be used as a reference, but the results you get are not necessarily the same. The results you get may be different, because once again it all depends on the condition of the field and the equipment used.
So the answer to the question how much is the maximum distance for UTP Cable PoE Mikrotik? May be useful and if you have questions or suggestions please fill in the comments field below.
Thank you
Comments